<?xml version="1.0" encoding="UTF-8" ?>
<gs_provision version="1">
	<mac>000b826f3b00</mac>
	<config version="1">
		<P271>1</P271> <!-- Account 1 Active -->
		<P270>FOCIMR2</P270> <!-- Account Name CONFIGURAR -->
		<P47>sip.tomalish.net:65060</P47> <!-- SIP Server CONFIGURAR -->
		<P2312></P2312> <!-- Secondary SIP Server -->
		<P48></P48> <!-- Outbound Proxy -->
		<P35>1102</P35> <!-- SIP User ID CONFIGURAR -->
		<P36>1102</P36> <!-- Authenticate ID CONFIGURAR -->
		<P33>1102</P33> <!-- Voice Mail UserID CONFIGURAR -->
		<P34>nJpV8jKyGeK6</P34> <!-- Authenticate Password CONFIGURAR -->
		<P3>Adrian Salmeron</P3> <!-- Display Name CONFIGURAR -->
		<P103>0</P103> <!-- DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV, 3 - Use Configured IP. Default is 0 -->
		<P2308>sip.tomalish.net</P2308> <!-- Primary IP -->
		<P2309></P2309> <!-- Backup IP 1 -->
		<P2310></P2310> <!-- Backup IP 2 -->
		<P52>0</P52> <!-- NAT Traversal. 0 - No, 1 - STUN, 2 - keep alive, 3 - UPnP, 4 - Auto, 5 - VPN. Default is 0. -->
		<P197></P197> <!-- Proxy-Require (A SIP extension to enable firewall penetration). Max length is 64 characters -->
		<P63>0</P63> <!-- TEL URI. 0 - Disabled, 1 - User=Phone, 2 - Enabled. Default is 0 -->
		<P31>1</P31> <!-- SIP Registration. 0 - No, 1 - Yes. Default is 1 -->
		<P81>1</P81> <!-- Unregister On Reboot. 0 - No, 1 - Yes. Default is 0 -->
		<P32>5</P32> <!-- Register Expiration (in minutes). Default is 60. Max about 45 days OBSERVAR -->
		<P2330>0</P2330> <!-- Reregister Before Expiration (in seconds). Default is 0 second -->
		<P40>5060</P40> <!-- Local SIP Port. Default is 5060 OBSERVAR -->
		<P138>20</P138> <!-- SIP Registration Failure Retry Wait Time (in seconds). Default is 20 -->
		<P209>50</P209> <!-- SIP T1 Timeout. RFC 3261 T1 value (RTT estimate) -->
		<P250>400</P250> <!-- SIP T2 Timeout. RFC 3261 T2 value. The maximum retransmit interval for non-INVITE requests and INVITE responses -->
		<P130>1</P130> <!-- SIP Transport. 0 - UDP, 1 - TCP, 2 - TLS/TCP. Default is 0 -->
		<P2329>1</P2329> <!-- SIP URI Scheme when using TLS. 0 - sip, 1 - sips. Default is 1 -->
		<P2331>0</P2331> <!-- Use Actual Ephemeral Port in Contact with TCP/TLS. 0 - No, 1 - Yes. Default is 0 -->
		<P2305></P2305> <!-- Remove OBP from Route. 0 - No, 1 - Yes. Default is 0 -->
		<P2305>0</P2305> <!-- Remove OBP from Route. 0 - No, 1 - Yes. Default is 0 -->
		<P288>1</P288> <!-- Support SIP Instace ID. 0 - No, 1 - Yes. Default is 1 -->
		<P99>1</P99> <!-- SUBSCRIBE for MWI. 0 - No, 1 - Yes. Default is 0 -->
		<P2319>1</P2319> <!-- SUBSCRIBE for Registration. 0 - No, 1 - Yes. Default is 0 -->
		<P272>0</P272> <!-- Enable 100rel. 0 - No, 1 - Yes. Default is 0 -->
		<P2324>0</P2324> <!-- Caller ID Display. 0 - Auto, 1 - Disabled, 2 - From Header. Default is 0 -->
		<P2338>0</P2338> <!-- Use Privacy Header -->
		<P2339>0</P2339> <!-- Use P-Preferred-Identity Header -->
		<P2341>0</P2341> <!-- Broadsoft Call Center. 0 - No, 1 - Yes. Default is 0 -->
		<P2342>0</P2342> <!-- Hoteling Event. 0 - No, 1 - Yes. Default is 0 -->
		<P2343>0</P2343> <!-- Call Center Status. 0 - No, 1 - Yes. Default is 0 -->
		<P2340>0</P2340> <!-- PUBLISH to Call Center. 0 - No, 1 - Yes. Default is 0 -->
		<P2325>0</P2325> <!-- Feature Key Synchronization. 0 - Disabled, 1 - Enabled. Default is 0 -->
		<P2313>15</P2313> <!-- Line-Seize Timeout (in seconds). Default is 15 -->
		<P134></P134> <!-- Eventlist BLF URI -->
		<P2318></P2318> <!-- Conference URI -->
		<P2350></P2350> <!-- Music On Hold URI -->
		<P1347>**</P1347> <!-- BLF Call-pickup Prefix. Default is ** -->
		<P188>0</P188> <!-- PUBLISH for Presence. 0 - No, 1 - Yes. Default is 0 -->
		<P198>100</P198> <!-- Special Feature. 100 - Standard, 101 - Nortel MCS, 102- Broadsoft, 108 - CBCOM, 109 - RNK, 110 - Sylantro, 117 - Huawei IMS, 119 - Phonepower -->
		<P260>180</P260> <!-- Session Expiration (in seconds). Default is 180 -->
		<P261>90</P261> <!-- Minimum SE (in seconds). Default is 90. This value must be lower than or equal to P260 -->
		<P262>0</P262> <!-- Caller Request Timer (Request for timer when calling). 0 - No, 1 - Yes. Default is 0 -->
		<P263>0</P263> <!-- Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) -->
		<P264>0</P264> <!-- Force Timer (Still use timer when remote party does not support timer). 0 - No, 1 - Yes. Default is 0 -->
		<P266>0</P266> <!-- UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS. Default is 0 -->
		<P267>1</P267> <!-- UAS Specify Refresher. 1 - UAC, 2 - UAS. Default is 1 -->
		<P265>0</P265> <!-- Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE). -->
		<P2311>0</P2311> <!-- Check Domain Certificates. When set to Yes/Enabled, domain certificate will be checked as defined in RFC5922 -->
		<P2306>0</P2306> <!-- Validate Incoming Messages. 0 - No, 1 - Yes. Default is 0 -->
		<P258>0</P258> <!-- Check SIP User ID for incoming INVITE. 0 - No, 1 - Yes. Default is 0 -->
		<P2347>0</P2347> <!-- Accept Incoming SIP from Proxy Only. 0 - No, 1 - Yes. Default is 0 -->
		<P2346>0</P2346> <!-- Authenticate Incoming INVITE. 0 - No, 1 - Yes. Default is 0 -->
		<P2301>0</P2301> <!-- Send DTMF: In-audio. 0 - No, 1 - Yes. Default is 0 -->
		<P2302>1</P2302> <!-- Send DTMF: Via RTP (RFC2833). 0 - No, 1 - Yes. Default is 1 -->
		<P2303>0</P2303> <!-- Send DTMF: Via SIP INFO. 0 - No, 1 - Yes. Default is 0 -->
		<P79>101</P79> <!-- DTMF Payload Type. Default is 101 -->
		<P57>9</P57> <!-- 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B, 98 - iLBC -->
		<P58>18</P58> <!-- choice 2. Default is 8 -->
		<P59>0</P59> <!-- choice 3. Default is 4 -->
		<P60>8</P60> <!-- choice 4. Default is 18 -->
		<P61>98</P61> <!-- choice 5. Default is 9 -->
		<P62>2</P62> <!-- choice 6. Default is 98 -->
		<P46>4</P46> <!-- choice 7. Default is 2 -->
		<P2348>0</P2348> <!-- Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes. Default is 0 -->
		<P137>0</P137> <!-- Disable Multiple m line in SDP. 0 - No, 1 - Yes. Default is 0 -->
		<P183>0</P183> <!-- SRTP Mode. 0 - Disabled, 1 - Enabled but not forced, 2 - Enabled and forced, 3 - Optional. Default is 0 -->
		<P2363>0</P2363> <!-- Crypto Life Time. 0 - No, 1 - Yes. Default is 0 -->
		<P291>0</P291> <!-- Symmetric RTP. 0 - No, 1 - Yes. Default is 0 -->
		<P50>1</P50> <!-- Silence Suppression. 0 - No, 1 - Yes. Default is 0 -->
		<P37>2</P37> <!-- Voice Frames per TX (up to 10/20/32/64 frames for G711/G726/G723/other codecs respectively). Default is 2 -->
		<P49>1</P49> <!-- G723 rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate. Default is 1 -->
		<P2323>0</P2323> <!-- G.726-32 Packing Mode. 0 - ITU, 1 - IETF. Default is 0 -->
		<P97>0</P97> <!-- iLBC Frame Size. 0 - 20ms, 1 - 30ms. Default is 1 -->
		<P96>97</P96> <!-- iLBC payload type. Default is 97 -->
		<P133>1</P133> <!-- Jitter Buffer Type. 0 - Fixed, 1 - Adaptive. Default is 1 -->
		<P132>2</P132> <!-- Jitter Buffer Length. 0 - 100ms, 1 - 200ms, 2 - 300ms, 3 - 400ms, 4 - 500ms, 5 - 600ms, 6 - 700ms, 7 - 800ms -->
		<P29>0</P29> <!-- Early Dial (use "Yes" only if proxy supports 484 response). 0 - No, 1 - Yes. Default is 0 -->
		<P66></P66> <!-- Dial Plan Prefix -->
		<P290>{00xxxxxxxxxxxxx|00xxxxxxxxxxxx|00xxxxxxxxxxx|045xxxxxxxxxx|044xxxxxxxxxx|01xxxxxxxxxx|1xxxxxxx|2xxxxxxx|3xxxxxxx|4xxxxxxx|5xxxxxxx|6xxxxxxx|7xxxxxxx|8xxxxxxx|9xxxxxxx|030|*xxxx|*xxx|*xx|*x|x+}</P290> <!-- Dial Plan. Default is { x+ | *x+ | *xx*x+ } -->
		<P139>60</P139> <!-- Delayed Call Forward Wait Time (in seconds). Default is 20 -->
		<P191>0</P191> <!-- Enable Call Features.  0 - No, 1 - Yes. Default is 1 -->
		<P182>0</P182> <!-- Call Log. 0 - Log All, 1 - Log Incoming/Outgoing only (Missed calls NOT recorded), 2 - Disable Call Log. Default is 0 -->
		<P104>1</P104> <!-- Account Ring Tone. 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3. Default is 0 VIGILAR -->
		<P1488></P1488> <!-- Matching Incoming Caller ID. Matching Rule 1 -->
		<P1489>0</P1489> <!-- Matching Rule 1 Distinctive Ringtone -->
		<P1490></P1490> <!-- Matching Incoming Caller ID. Matching Rule 2 -->
		<P1491>0</P1491> <!-- Matching Rule 2 Distinctive Ringtone -->
		<P1492></P1492> <!-- Matching Incoming Caller ID. Matching Rule 3 -->
		<P1493>0</P1493> <!-- Matching Rule 3 Distinctive Ringtone -->
		<P1328>60</P1328> <!-- Ring Timeout (in seconds). Default is 60 -->
		<P65>0</P65> <!-- Send Anonymous (caller ID will be blocked if set to Yes). 0 - No, 1 - Yes. Default is 0 -->
		<P129>0</P129> <!-- Anonymous Call Rejection. 0 - No, 1 - Yes. Default is 0 -->
		<P90>0</P90> <!-- Auto Answer. 0 - No, 1 - Yes. Default is 0 -->
		<P298>1</P298> <!-- Allow Auto Answer by Call-Info. 0 - No, 1 - Yes. Default is 0 -->
		<P2356></P2356> <!-- Custom Call-info for Auto Answer.  -->
		<P135>1</P135> <!-- Refer-To Use Target Contact. 0 - No, 1 - Yes. Default is 0 -->
		<P2304>0</P2304> <!-- Transfer on conference Hang-Up. 0 - No, 1 - Yes. Default is 0 -->
		<P2384>0</P2384> <!-- Disable Recovery on Blind Transfer. 0 - No, 1 - Yes. Default is 0 -->
		<P85>5</P85> <!-- No Key Entry Timeout (in seconds). Default is 4 -->
		<P72>1</P72> <!-- Use # as Dial Key. 0 - No, 1 - Yes. Default is 1 -->
		<P2361>0</P2361> <!-- Hold Method. 0 - Auto, 1 - RFC3264. Default is 0 -->
		<P2344>*78</P2344> <!-- DND Call Feature ON -->
		<P2345>*79</P2345> <!-- DND Call Feature OFF -->
		<P401>0</P401> <!-- Account Active. 0 - No, 1 - Yes. Default is 1 -->
		<P417></P417> <!-- Account Name -->
		<P402></P402> <!-- SIP Server -->
		<P2412></P2412> <!-- Secondary SIP Server -->
		<P403></P403> <!-- Outbound Proxy -->
		<P404></P404> <!-- SIP User ID -->
		<P405></P405> <!-- Authenticate ID -->
		<P406></P406> <!-- Authenticate password -->
		<P407></P407> <!-- Display Name -->
		<P426></P426> <!-- Voice Mail UserID -->
		<P408>0</P408> <!-- DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV, 3 - Use Configured IP. Default is 0 -->
		<P2408></P2408> <!-- Primary IP. Maximum 15 characters -->
		<P2409></P2409> <!-- Backup IP 1 -->
		<P2410></P2410> <!-- Backup IP 2 -->
		<P414>0</P414> <!-- NAT Traversal. 0 - No, 1 - STUN, 2 - keep alive, 3 - UPnP, 4 - Auto, 5 - VPN. Default is 0 -->
		<P418></P418> <!-- Proxy-Require (A SIP extension to enable firewall penetration). Max length is 64 characters -->
		<P409>0</P409> <!-- TEL URI. 0 - Disabled, 1 - User=Phone, 2 - Enabled. Default is 0 -->
		<P410>1</P410> <!-- SIP Registration. 0 - No, 1 - Yes. Default is 1 -->
		<P411>1</P411> <!-- Unregister On Reboot. 0 - No, 1 - Yes. Default is 0 -->
		<P412>60</P412> <!-- Register Expiration (in minutes). Default is 60. Max is 45 days -->
		<P2430>0</P2430> <!-- Reregister before Expiration (in seconds). Default is 0 -->
		<P413>5062</P413> <!-- Local SIP port. Default is 5062 -->
		<P471>20</P471> <!-- SIP Registration Failure Retry Wait Time (in seconds). Default is 20 -->
		<P440>50</P440> <!-- SIP T1 Timeout. RFC 3261 T1 value (RTT estimate) -->
		<P441>400</P441> <!-- SIP T2 Interval. RFC 3261 T2 value. The maximum retransmit interval for non-INVITE requests and INVITE responses -->
		<P448>0</P448> <!-- SIP Transport. 0 - UDP, 1 - TCP, 2 - TCP/TLS. Default is 0 -->
		<P2429>1</P2429> <!-- SIP URI Scheme when using TLS. 0 - sip, 1 - sips. Default is 1 -->
		<P2431>0</P2431> <!-- Use Actual Ephemeral Port in Contact with TCP/TLS. 0 - No, 1- Yes. Default is 0 -->
		<P2405>0</P2405> <!-- Remove OBP from Route. 0 - No, 1 - Yes. Default is 0 -->
		<P489>1</P489> <!-- Support SIP Instace ID. 0 - No, 1 - Yes. Default is 1 -->
		<P415>0</P415> <!-- SUBSCRIBE for MWI (Whether or not send SUBSCRIBE for Message Waiting Indication). 0 - No, 1 - Yes. Default is 0 -->
		<P2419>0</P2419> <!-- SUBSCRIBE for Registration. 0 - No, 1 - Yes. Default is 0 -->
		<P435>0</P435> <!-- Enable 100rel. 0 - No, 1 - Yes. Default is 0 -->
		<P2424>0</P2424> <!-- Caller ID Display. 0 - Auto, 1 - Disabled, 2 - From Header. Default is 0 -->
		<P2438>0</P2438> <!-- Use Privacy Header -->
		<P2439>0</P2439> <!-- Use P-Preferred-Identity Header. 0 - Default, 1 - No, 2 - Yes. Default is 0 -->
		<P2441>0</P2441> <!-- Broadsoft Call Center. 0 - No, 1 - Yes. Default is 0 -->
		<P2442>0</P2442> <!-- Hoteling Event. 0 - No, 1 - Yes. Default is 0 -->
		<P2443>0</P2443> <!-- Call Center Status. 0 - No, 1 - Yes. Default is 0 -->
		<P2440>0</P2440> <!-- PUBLISH to Call Center. 0 - No, 1 - Yes. Default is 0 -->
		<P2425>0</P2425> <!-- Feature Key Synchronization. 0 - Disabled, 1 - Enabled. Default is 0. -->
		<P2413>15</P2413> <!-- Line-Seize Timeout (in seconds). Default is 15 -->
		<P444></P444> <!-- Eventlist BLF URI -->
		<P2418></P2418> <!-- Conference URI -->
		<P2450></P2450> <!-- Music On Hold URI -->
		<P481>**</P481> <!-- BLF Call-pickup Prefix. Default is ** -->
		<P488>0</P488> <!-- PUBLISH for Presence. 0 - No, 1 - Yes. Default is 0 -->
		<P424>100</P424> <!-- Special Feature. 100 - Standard, 101 - Nortel MCS, 102- Broadsoft, 108 - CBCOM, 109 - RNK, 110 - Sylantro, 117 - Huawei IMS, 119 - Phonepower -->
		<P434>180</P434> <!-- Session Expiration (in seconds). Default is 180 -->
		<P427>90</P427> <!-- Minimum SE (in seconds). Default is 90. This value must be lower than or equal to P434 -->
		<P428>0</P428> <!-- Caller Request Timer (Request for timer when calling). 0 - No, 1 - Yes -->
		<P429>0</P429> <!-- Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) -->
		<P430>0</P430> <!-- Force Timer (Still use timer when remote party does not support timer). 0 - No, 1 - Yes. Default is 0 -->
		<P432>0</P432> <!-- UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS. Default is 0 -->
		<P433>1</P433> <!-- UAS Specify Refresher. 1 - UAC, 2 - UAS. Default is 1 -->
		<P431>0</P431> <!-- Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE) -->
		<P2411>0</P2411> <!-- Check Domain Certificates. 0 - No, 1 - Yes. When set to Yes/Enabled, the domain certificate will be checked as defined in RFC5922 -->
		<P2406>0</P2406> <!-- Validate Incoming Messages. 0 - No, 1 - Yes. Default is 0 -->
		<P449>0</P449> <!-- Check SIP User ID for incoming INVITE. 0 - No, 1 - Yes. Default is 0 -->
		<P2447>0</P2447> <!-- Accept Incoming SIP from Proxy Only. 0 - No, 1 - Yes. Default is 0 -->
		<P2446>0</P2446> <!-- Authenticate Incoming INVITE. 0 - No, 1 - Yes. Default is 0 -->
		<P2401>0</P2401> <!-- Send DTMF: In-audio. 0 - No, 1 - Yes. Default is 0 -->
		<P2402>1</P2402> <!-- Send DTMF: Via RTP (RFC2833). 0 - No, 1 - Yes. Default is 1 -->
		<P2403>0</P2403> <!-- Send DTMF: Via SIP INFO. 0 - No, 1 - Yes. Default is 0 -->
		<P496>101</P496> <!-- DTMF Payload Type. Default is 101 -->
		<P451>9</P451> <!-- Preferred Vocoder 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B, 98 - iLBC -->
		<P452>18</P452> <!-- choice 2. Default is 8 -->
		<P453>0</P453> <!-- choice 3. Default is 4 -->
		<P454>8</P454> <!-- choice 4. Default is 18 -->
		<P455>98</P455> <!-- choice 5. Default is 9 -->
		<P456>2</P456> <!-- choice 6. Default is 98 -->
		<P457>4</P457> <!-- choice 7. Default is 2 -->
		<P2448>0</P2448> <!-- Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes. Default is 0 -->
		<P487>0</P487> <!-- Disable Multiple m line in SDP. 0 - No, 1 - Yes. Default is 0 -->
		<P443>0</P443> <!-- SRTP Mode -->
		<P2463>0</P2463> <!-- Crypto Life Time. 0 - No, 1 - Yes. Default is 0 -->
		<P460>0</P460> <!-- Symmetric RTP. 0 - No, 1 - Yes. Default is 0 -->
		<P485>0</P485> <!-- Silence Suppression 0 - No, 1 - Yes. Default is 0 -->
		<P486>2</P486> <!-- Voice Frames per TX (up to 10/20/32/64 frames for G711/G726/G723/other codecs respectively). Default is 2 -->
		<P493>1</P493> <!-- G723 rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate. Default is 1 -->
		<P2423>0</P2423> <!-- G.726-32 Packing Mode. 0 - ITU, 1 - IETF. default is 0 -->
		<P495>1</P495> <!-- iLBC Frame Size. 0 - 20ms, 1 - 30ms. Default is 1 -->
		<P494>97</P494> <!-- iLBC payload type. Default is 97. -->
		<P498>1</P498> <!-- Jitter Buffer Type. 0 - Fixed, 1 - Adaptive. Default is 1 -->
		<P497>2</P497> <!-- Jitter Buffer Length.  -->
		<P422>0</P422> <!-- Early Dial (use "Yes" only if proxy supports 484 response). 0 - No, 1 - Yes. Default is 0 -->
		<P419></P419> <!-- Dial Plan Prefix -->
		<P459>{ x+ | *x+ | *xx*x+ }</P459> <!-- Dial Plan. Default is { x+ | *x+ | *xx*x+ } -->
		<P470>20</P470> <!-- Delayed Call Forward Wait Time (in seconds). Default 20 -->
		<P420>1</P420> <!-- Enable Call Features. 0 - No, 1 - Yes. Default is 1 -->
		<P442>0</P442> <!-- Call Log. 0 - Log All, 1 - Log Incoming/Outgoing only (Missed calls NOT recorded), 2 - Disable Call Log. Default is 0 -->
		<P423>1</P423> <!-- Account Ring Tone. 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3. Default is 0 -->
		<P1494></P1494> <!-- Matching Incoming Caller ID. Matching Rule 1 -->
		<P1495>0</P1495> <!-- Matching Rule 1 Distinctive Ringtone -->
		<P1496></P1496> <!-- Matching Incoming Caller ID. Matching Rule 2. -->
		<P1497>0</P1497> <!-- Matching Rule 2 Distinctive Ringtone. -->
		<P1498></P1498> <!-- Matching Incoming Caller ID. Matching Rule 3. -->
		<P1499>0</P1499> <!-- Matching Rule 3 Distinctive Ringtone. -->
		<P476>60</P476> <!-- Ring Timeout (in seconds) Default is 60 -->
		<P421>0</P421> <!-- Send Anonymous (caller ID will be blocked if set to Yes). 0 - No, 1 - Yes. Default is 0 -->
		<P446>0</P446> <!-- Anonymous Call Rejection. 0 - No, 1 - Yes. Default is 0 -->
		<P425>0</P425> <!-- Auto Answer. 0 - No, 1 - Yes. Default is 0 -->
		<P438>0</P438> <!-- Allow Auto Answer by Call-Info. 0 - No, 1 - Yes. Default is 0 -->
		<P2456></P2456> <!-- Custom Call-info for Auto Answer.  -->
		<P469>0</P469> <!-- Refer-To Use Target Contact. 0 - No, 1 - Yes. Default is 0 -->
		<P2404>0</P2404> <!-- Transfer on conference Hang-Up. 0 - No, 1 - Yes. Default is 0 -->
		<P2484>0</P2484> <!-- Disable Recovery on Blind Transfer. 0 - No, 1 - Yes. Default is 0 -->
		<P491>4</P491> <!-- No Key Entry Timeout. Default is 4 -->
		<P492>1</P492> <!-- Use # as Dial Key. 0 - No, 1 - Yes. Default is 1 -->
		<P2461>0</P2461> <!-- Hold Method. 0 - Auto, 1 - RFC3264. Default is 0 -->
		<P2444></P2444> <!-- DND Call Feature ON -->
		<P2445></P2445> <!-- DND Call Feature OFF -->
		<P1415>0</P1415> <!-- Internet Protocol. 0 - Prefer IPv4, 1 - Prefer IPv6. Default is 0 -->
		<P8>0</P8> <!-- IP Address Mode. 0 - DHCP, 1 - Static IP, 2 - PPPoE. Default is 0 -->
		<P146></P146> <!-- Host name, DHCP option 12. Max length allowed is 64 characters -->
		<P148>FOCIM Grandstream</P148> <!-- Vendor Class ID, DHCP option 60. Max length allowed is 64 characters -->
		<P82></P82> <!-- PPPoE Account ID -->
		<P83></P83> <!-- PPPoE Password -->
		<P269></P269> <!-- PPPoE Service Name -->
		<P9>192</P9> <!-- IP Address. Ignore if DHCP or PPPoE is used -->
		<P10>168</P10> <!-- Number: 0 - 255 -->
		<P11>0</P11> <!-- Number: 0 - 255 -->
		<P12>160</P12> <!-- Number: 0 - 255 -->
		<P13>255</P13> <!-- Subnet mask. Ignore if DHCP or PPPoE is used -->
		<P14>255</P14> <!-- Number: 0 - 255 -->
		<P15>0</P15> <!-- Number: 0 - 255 -->
		<P16>0</P16> <!-- Number: 0 - 255 -->
		<P17>0</P17> <!-- Gateway. Ignore if DHCP or PPPoE is used -->
		<P18>0</P18> <!-- Number: 0 - 255 -->
		<P19>0</P19> <!-- Number: 0 - 255 -->
		<P20>0</P20> <!-- Number: 0 - 255 -->
		<P21>0</P21> <!-- DNS 1 Server. Ignore if DHCP or PPPoE is used -->
		<P22>0</P22> <!-- Number: 0 - 255 -->
		<P23>0</P23> <!-- Number: 0 - 255 -->
		<P24>0</P24> <!-- Number: 0 - 255 -->
		<P25>0</P25> <!-- DNS 2 Server. Ignore if DHCP or PPPoE is used -->
		<P26>0</P26> <!-- Number: 0 - 255 -->
		<P27>0</P27> <!-- Number: 0 - 255 -->
		<P28>0</P28> <!-- Number: 0 - 255 -->
		<P92>0</P92> <!-- Preferred DNS server.  (if specified). -->
		<P93>0</P93> <!-- Number: 0 - 255 -->
		<P94>0</P94> <!-- Number: 0 - 255 -->
		<P95>0</P95> <!-- Number: 0 - 255 -->
		<P1419>0</P1419> <!-- IPv6 Address type. 0 - Auto Configured, 1 - Statically Configured. Default is 0. -->
		<P1424></P1424> <!-- DNS Server 1 for IPv6 Address -->
		<P1425></P1425> <!-- DNS Server 2 for IPv6 Address -->
		<P1423></P1423> <!-- Preferred DNS Server for IPv6 Address -->
		<P1426></P1426> <!-- IPv6 Address type: Statically configured. 0 - Full Static, 1 - Prefix Static -->
		<P1420></P1420> <!-- Full Static: Static IPv6 Address -->
		<P1421></P1421> <!-- Full Static: IPv6 Prefix Length -->
		<P1422></P1422> <!-- Prefix Static: IPv6 Prefix (64bits) -->
		<P7901>0</P7901> <!-- 802.1X Mode. 0 - disable, 1 - EAP-MD5, 2 - EAP-TLS, 3 - EAP-PEAPv0/MSCHAPv2. Default is 0 -->
		<P7902></P7902> <!-- 802.1X Identity. Max length allowed is 64 characters -->
		<P7903></P7903> <!-- MD5 Password. Max length allowed is 64 characters -->
		<P1552></P1552> <!-- HTTP Proxy -->
		<P1553></P1553> <!-- HTTPS Proxy -->
		<P38>12</P38> <!-- Layer 3 QoS (IP Diff-Serv or Precedence value for RTP). Default is 12 -->
		<P51>0</P51> <!-- Layer 2 QoS. 802.1Q/VLAN Tag (VLAN classification for RTP). Default is 0 -->
		<P87>0</P87> <!-- Layer 2 QoS. 802.1p priority value (0 - 7). Default is 0 -->
		<P1348>0</P1348> <!-- PC Port Mode. 0 - Enable, 1 - Disabled, 2 - Mirrored. Default is 0 -->
		<P229>0</P229> <!-- PC Port VLAN Tag. Default is 0 -->
		<P230>0</P230> <!-- PC Port priority value (0 - 7). Default is 0 -->
		<P1684>0</P1684> <!-- Enable LLDP.  0 - Disabled, 1 - Enabled. Default is 1 -->
		<P196>dejameentrar</P196> <!-- End User Password -->
		<P2>870923</P2> <!-- Admin password for web interface -->
		<P238>0</P238> <!-- Firmware Upgrade and Provisioning -->
		<P1359></P1359> <!-- XML Config File Password -->
		<P1360></P1360> <!-- HTTP/HTTPS User Name -->
		<P1361></P1361> <!-- HTTP/HTTPS Password -->
		<P20713>0</P20713> <!-- Always Authenticate Before Challenge. 0 - No,  1 - Yes. Default is 0 -->
		<P212>1</P212> <!-- Firmware Upgrade Via. 0 - TFTP Upgrade,  1 - HTTP Upgrade, 2 - HTTPS Upgrade. Default is 1 -->
		<P192>www.tomalish.net/img/autoprov/gxp1400</P192> <!-- Firmware Server Path -->
		<P237>www.tomalish.net/img/autoprov/gxp1400</P237> <!-- Config Server Path -->
		<P232></P232> <!-- Firmware File Prefix -->
		<P233></P233> <!-- Firmware File Postfix -->
		<P234></P234> <!-- Config File Prefix -->
		<P235></P235> <!-- Config File Postfix -->
		<P145>0</P145> <!-- Allow DHCP Option 43 and Option 66 to override server. 0 - No, 1 - Yes. Default is 1 -->
		<P1411>0</P1411> <!-- Allow DHCP Option 120 to Override SIP Server -->
		<P1414>0</P1414> <!-- 3CX Auto Provision. 0 - No, 1 - Yes. Default is 1 -->
		<P194>2</P194> <!-- Automatic Upgrade.  -->
		<P193>1440</P193> <!-- Check for new firmware every () minutes. Default is 7 days. -->
		<P285>1</P285> <!-- Hour of the Day (0-23). Default is 1 -->
		<P286>1</P286> <!-- Day of the Week (0-6). Default is 1 -->
		<P4428>0</P4428> <!-- Disable SIP NOTIFY Authentication. 0 -No, 1 - Yes. Default is No. -->
		<P240>0</P240> <!-- Authenticate Conf File. 0 - No, 1 - Yes. Default is No -->
		<P207></P207> <!-- Syslog Server (name of the server, max length is 64 characters) -->
		<P208>0</P208> <!-- Syslog Level. 0 - NONE, 1 - DEBUG, 2 - INFO, 3 - WARNING, 4 - ERROR. Default is 0 -->
		<P1387>0</P1387> <!-- Send SIP Log. 0 - Do not send SIP log in Syslog, 1 - Send SIP log in Syslog if configured and set to DEBUG level. Default is 0 -->
		<P1438>1</P1438> <!-- Auto recover from abnormal. 0 - No, 1 - Yes. Default is 1 -->
		<P1362>es</P1362> <!-- Display Language. Default is auto -->
		<P399></P399> <!-- Language File postfix (for Downloaded Language) -->
		<P1409>0</P1409> <!-- Enable TR069. 0 - No, 1 - Yes. Default is 0 -->
		<P4503></P4503> <!-- ACS URL -->
		<P4504></P4504> <!-- TR-069 Username -->
		<P4505></P4505> <!-- TR-069 Password -->
		<P4506>0</P4506> <!-- Periodic Inform Enable. 0 - No, 1 - Yes. Default is 0 -->
		<P4507>86400</P4507> <!-- Periodic Inform Interval -->
		<P4511></P4511> <!-- Connection Request Username -->
		<P4512></P4512> <!-- Connection Request Password -->
		<P4518>0</P4518> <!-- Connection Request Port -->
		<P8220></P8220> <!-- CPE SSL Certificate -->
		<P8221></P8221> <!-- CPE SSL Private Key -->
		<P1357>0</P1357> <!-- Configuration Via Keypad Menu. 0 - Unrestricted, 1 - Basic settings only, 2 - Constraint mode. Default is 0 -->
		<P1382>1</P1382> <!-- Enable STAR key Keypad locking. 0 - No, 1 - Yes. Default is 1 -->
		<P1383>1234</P1383> <!-- Password to lock/unlock (0-9 only) -->
		<P280></P280> <!-- SIP TLS Certificate -->
		<P279></P279> <!-- SIP TLS Private Key -->
		<P281></P281> <!-- SIP TLS Private Key Password -->
		<P1650>0</P1650> <!-- Web Access Mode. 0 - HTTPS, 1 - HTTP. Default is 1 -->
		<P276>1</P276> <!-- Disable SSH. 0 - No, 1 - Yes. Default is 0 -->
		<P330>3</P330> <!-- Enable Phonebook XML Download. # 0 - No, 1 - YES, HTTP, 2 - YES, TFTP, 3 - Yes, HTTPS. Default is 0 -->
		<P331>www.tomalish.net/img/autoprov/gxp1400</P331> <!-- Phonebook XML Server Path -->
		<P332>360</P332> <!-- Phonebook Download Interval (in minutes) -->
		<P333>1</P333> <!-- Remove Manually-edited entries on Download. 0 - No, 1 - Yes. Default is 1 -->
		<P2914>0</P2914> <!-- Sort Phonebook by. 0 - Last Name. 1 - First Name. Default is 0 -->
		<P1526>2</P1526> <!-- Phonebook Key Function. 0 - Default, 1 - LDAP Search, 2 - Local Phonebook, 3 - Local Group. -->
		<P8020></P8020> <!-- LDAP Directory -->
		<P8021>389</P8021> <!-- LDAP Server Port. Default is 389. -->
		<P8022></P8022> <!-- Base. The LDAP search base refers to the location in the directory where the search is requested to begin -->
		<P8023></P8023> <!-- User name. The bind "Username" for querying LDAP servers. Some LDAP servers allow anonymous binds in which case the setting can be left blank -->
		<P8024></P8024> <!-- Password. The bind "Password" for querying LDAP servers. And the field can be left blank if the LDAP server allows anonymous binds -->
		<P8025></P8025> <!-- LDAP Number Filter -->
		<P8026></P8026> <!-- LDAP Name Filter -->
		<P8027>3</P8027> <!-- LDAP Version. Protocol version for the phone when send the bind requests -->
		<P8028></P8028> <!-- LDAP Name Attributes. This setting specifies the "name" attributes of each record which are returned in the LDAP search result -->
		<P8029></P8029> <!-- LDAP Number Attributes. This setting specifies the “number” attributes of each record which are returned in the LDAP search result -->
		<P8030></P8030> <!-- LDAP Display Name. The entry information to be shown on phone LCD. Grandstream phones will display up to 3 fields -->
		<P8031>50</P8031> <!-- Max Hits. The setting specifies the maximum number of results to be returned by the LDAP server -->
		<P8032>30</P8032> <!-- Search Timeout (in seconds). Default is 30 -->
		<P8033>0</P8033> <!-- Sort Results. This setting is used for sorting searching result. Default is 0 -->
		<P8035>0</P8035> <!-- LDAP Lookup -->
		<P8034>0</P8034> <!-- Outgoing calls. 0 - No, 1 - Yes. Default is 0 -->
		<P8036></P8036> <!-- Lookup Display Name -->
		<P39>5004</P39> <!-- Local RTP port. Default is 5004 debe ser par VIGILAR -->
		<P78>0</P78> <!-- Use Random Port. 0 - No, 1 - Yes. Default is 0 -->
		<P84>30</P84> <!-- Keep-alive interval (in seconds). Default is 20 -->
		<P101></P101> <!-- Use NAT IP. This will enable our SIP client to use this IP in the SIP/SDP message. Example 64.3.153.50 -->
		<P76></P76> <!-- STUN server -->
		<P1345>0</P1345> <!-- Public Mode. 0 - No. 1 - Yes. Default is 0 -->
		<P2915>0</P2915> <!-- Public Mode Login Expiration. Default is 0 -->
		<P71></P71> <!-- Off-hook Auto Dial -->
		<P1485>30</P1485> <!-- Off-hook timeout (in seconds). Default is 30 -->
		<P91>0</P91> <!-- Disable Call Waiting. 0 - No, 1 - Yes. Default is 0 -->
		<P186>0</P186> <!-- Disable Call-Waiting Tone. 0 - No, 1 - Yes. Default is 0 -->
		<P1310>1</P1310> <!-- Disable Direct IP Call. 0 - No, 1 - Yes. Default is 0 -->
		<P184>0</P184> <!-- Use Quick IP-call mode. 0 - No, 1 - Yes. Default is 0 -->
		<P1311>0</P1311> <!-- Disable Conference. 0 - No, 1 - Yes. Default is 0 -->
		<P338>1</P338> <!-- Disable in-call DTMF display. 0 - No, 1 - Yes. Default is 0 -->
		<P1339>0</P1339> <!-- Enable MPK sending DTMF, 0 - No, 1 - Yes. Default is 0 -->
		<P1340>0</P1340> <!-- Disable DND Button. 0 - No, 1 - Yes. Default is 0 -->
		<P1565>0</P1565> <!-- Enable Idle Mute. 0 - No, 1 - Yes. Default is 0 -->
		<P1341>0</P1341> <!-- Disable Transfer. 0 - No, 1 - Yes. Defauls is 0 -->
		<P1525></P1525> <!-- In-call dial number on pressing transfer key -->
		<P1376>0</P1376> <!-- Auto-Attended Transfer. 0 - No, 1 -Yes. Default is 0 -->
		<P1406>0</P1406> <!-- Do not escape '#' as 23% in SIP URL. 0 - No, 1 - Yes. Default is 0 -->
		<P1561>0</P1561> <!-- Click-To-Dial Feature. 0 - No, 1 - Yes. Default is 0 -->
		<P1696>1</P1696> <!-- Blink message LED on ringing. 0 - No, 1 - Yes. Default is 0 -->
		<P1433>300</P1433> <!-- Call History Flash Writing: 0 means this option is disabled -->
		<P1434>200</P1434> <!-- Max Unsaved Log, 0-500, default is 200 -->
		<P1566>0</P1566> <!-- Paging Barge. 0 - Disable, 1 - priority 1, 2 - priority 2, 3 - priority 3,  -->
		<P1567>0</P1567> <!-- Paging Priority Active. 0 - Disabled, 1 - Enabled -->
		<P1568>0</P1568> <!-- Multicast Paging Codec. 18 - G.729A/B, 0 - PCMU, 8 - PCMA, 2 - G.726-32, 9 - G.722 -->
		<P1569></P1569> <!-- Multicast Listening # Priority 1 # Listening Address -->
		<P1570></P1570> <!-- Label -->
		<P1571></P1571> <!-- Priority 2 Listening Address -->
		<P1572></P1572> <!-- Label -->
		<P1573></P1573> <!-- Priority 3 Listening Address -->
		<P1574></P1574> <!-- Label -->
		<P1575></P1575> <!-- Priority 4 Listening Address -->
		<P1576></P1576> <!-- Label -->
		<P1577></P1577> <!-- Priority 5 Listening Address -->
		<P1578></P1578> <!-- Label -->
		<P1579></P1579> <!-- Priority 6 -->
		<P1580></P1580> <!-- Label -->
		<P1581></P1581> <!-- Priority 7 -->
		<P1582></P1582> <!-- Label -->
		<P1583></P1583> <!-- Priority 8 -->
		<P1584></P1584> <!-- Label -->
		<P1585></P1585> <!-- Priority 9 -->
		<P1586></P1586> <!-- Label -->
		<P1587></P1587> <!-- Priority 10 -->
		<P1588></P1588> <!-- Label -->
		<P345>f1=425,f2=425,c=100/400;</P345> <!-- System Ring Tone -->
		<P343>f1=425,f2=425;</P343> <!-- Dial Tone -->
		<P2909>f1=425,f2=425;</P2909> <!-- Second Dial Tone -->
		<P344>f1=425,f2=425,c=10/10;</P344> <!-- Message Waiting Tone -->
		<P346>f1=425,f2=425,c=200/400;</P346> <!-- Ring Back Tone -->
		<P347>f1=425,f2=425,c=20/60-20/500;</P347> <!-- Call-Waiting Tone -->
		<P1555>1</P1555> <!-- Call-Waiting Tone Gain. 0 - Low, 1 - Medium, 2 - High. Default is 0 -->
		<P348>f1=425,f2=425,c=25/25;</P348> <!-- Busy Tone -->
		<P349>f1=425,f2=425,c=25/25;</P349> <!-- Reorder Tone -->
		<P1312>0</P1312> <!-- HEADSET Key Mode. 0 = Default Mode, 1 = Toggle Headset/Speaker. Default is 0 -->
		<P1439>0</P1439> <!-- Always Ring Speaker. 0 - No, 1 - Yes. Default is 0 -->
		<P1301>0</P1301> <!-- Headset TX gain(db). 1 - -6, 0 - 0, 2 - +6. Default is 0 -->
		<P1302>0</P1302> <!-- Headset RX gain(db). 1 - -6, 0 - 0, 2 - +6. Default is 0 -->
		<P1464>0</P1464> <!-- Handset TX gain(db). 1 - -6, 0 - 0, 2 - +6. Default is 0 -->
		<P1329>10</P1329> <!-- LCD Contrast. Default is 10 -->
		<P30>10.0.0.1</P30> <!-- NTP Server -->
		<P144>1</P144> <!-- Allow DHCP Option 42 to override NTP server. 0 - No, 1 - Yes. Default is 1 -->
		<P64>CST6CDT,M4.1.0,M10.5.0</P64> <!-- Time Zone -->
		<P143>1</P143> <!-- Allow DHCP Option 2 to override Time Zone setting. 0 - No, 1 - Yes. Default is 1 -->
		<P246>MTZ+6MDT+5,M4.1.0,M11.1.0</P246> <!-- Self Defined Time zone. Max length allowed is 64 characters -->
		<P102>0</P102> <!-- Date Display Format -->
		<P122>1</P122> <!-- Time Display Format. 0 - 12 Hour, 1 - 24 Hour -->
		<P1402>1</P1402> <!-- Weather Update -->
		<P1405>0</P1405> <!-- City Code -->
		<P1377>MXNL0068</P1377> <!-- Self-Defined City Code -->
		<P1378>15</P1378> <!-- Update Interval (in minutes). Default is 15 -->
		<P1379>c</P1379> <!-- Degree Unit. auto - Automatic, f - Fahrenheit, c - Celsius. Default is auto -->
		<P340>3</P340> <!-- Enable Idle Screen XML Download -->
		<P1349>1</P1349> <!-- Download Screen XML At Boot-up. 0 - No, 1 - Yes. Default is 0 -->
		<P1343>0</P1343> <!-- Use Custom File Name. 0 - No, 1 - Yes. Default is 0 -->
		<P341>www.tomalish.net/img/autoprov/gxp1400</P341> <!-- Idle Screen XML Server Path -->
		<P1363>0</P1363> <!-- Key Mode. Default is 0 -->
		<P1364>0</P1364> <!-- Account. 0 - Account 1, 1 - Account 2 -->
		<P1465>FOCIM</P1465> <!-- Name. Max length allowed is 32 characters. CONFIGURAR -->
		<P1466>FOCIM</P1466> <!-- User ID. Max length allowed is 64 characters. CONFIGURAR -->
		<P1365>0</P1365> <!-- Line Key 2 -->
		<P1366>0</P1366> <!-- Account. 0 - Account 1, 1 - Account 2 -->
		<P1467>FOCIM</P1467> <!-- Name. Max length allowed is 32 characters. CONFIGURAR -->
		<P1468>FOCIM</P1468> <!-- User ID. Max length allowed is 64 characters. CONFIGURAR -->
	</config>
</gs_provision>
